New CD ROM Available
ILF/Evtec has a new CD ROM available, which contains video clips on many special sheeting applications. on our sheeters and reviews the ConverPro and SOHO Pro product lines.
The new CD ROM contains the following video clips:
1. About ILF
General ILF/Evtec background video with narration primarily for the printing and label industries
2. Model L600 Modular Cutting and Batching System
ILF Technologies presents the ILF/Evtec Model L600 Modular Cutting and Batching System for the forms and label industries. A compact modular cutting and batching system offered together or separately at a reasonable investment.
3. RBDS Rotary (Batch Delivery System)
ILF Technologies presents the ILF/Evtec Model RBDS (Rotary Batch Delivery System) or "Creel" wheel delivery system for hard to shingle products. Single wheel design allows for quick change over and fast make-ready.
4. Model EBS Batching Sheeter with Model CBI Chipboard Inserter
ILF Technologies presents the ILF/Evtec Model EBS batching sheeter with Model CBI chipboard inserter to automatically place chip in the ream stacks – bottom, top or both, shown running at 1200 fpm.
5. Stack of Stacks
ILF Technologies presents the "Stack of Stacks" system for high volume production of short count work with chip separation. Creates a stack of short counts (as low as 10) separated by chipboard up to 14" high for manual feeding later to a packaging line.
6. Model EBS Combination Batching and Deep Pile Sheeter
ILF Technologies presents the ILF/Evtec Model EBS Combination batching and deep pile sheeter capable of both batch/ream and skid/deep pile delivery. Shows changeover from batch to deep pile delivery; normally accomplished in about 30 minutes.
7. Model ESL Deep Pile Commercial Sheeter
ILF Technologies presents the ILF/Evtec Model ESL Deep Pile Commercial Sheeter available in widths to 38" and speeds to 1600 FPM.
8. Model EBS Batching Sheeter Feeding a Shrink Wrap Machine Inline thru two "Bump Turns"
ILF Technologies presents the ILF/Evtec Model EBS batching sheeter feeding a shrink machine inline thru two "bump" turns.
9. Model BT Conveyor System with 90 Degree "Bump Turn" Module
ILF Technologies presents the ILF/Evtec Model BT Conveyor system with 90 Degree "Bump Turn" Module. Unit shown has special servo linear pusher for precise programming. Changes leading edge orientation and typically used to feed a packaging line.
10. SOHO and CONVER PRO
ILF Technologies presents a general narrated overview of the ILF/Evtec SOHO and CONVER PRO cut size and small format folio sheeting systems for the converting industry.
11. CONVER PRO 60" Wide
ILF Technologies presents a special CONVER PRO 60" wide 6 pocket cut sheet line with 2.5 second cycle time batcher designed for 25/50 stack counts and speeds up to up to 80 reams per minute at 1000 fpm.
12. CONVER PRO - 5 Roll, 38" Wide
ILF Technologies presents a CONVER PRO 5 Roll and up to 38" wide, 4-pocket system with front discharge delivery of both reams and skids. This system runs lightweight "wrap" and parchment papers, and is designed with a special "localizing" infeed system for registering roll to roll pre-printed images.
ILF Technologies presents an ILF/Evtec CONVER PR 2 Roll, 38" wide, up to 4-pocket system for general converting applications. Capable of producing cut size ream sheets up to 22" long. Flexible special conveyor system allows feeding packaging line at two points with both grain long and grain short orientation, and easy rearrangement for hand packed reams. The ultimate in flexibility and fast change over.
ILF Technologies is pleased to present a Model EBS batching sheeting running a carbonless web and carrier sheet (2 roll). Every day ILF/Evtec sheeters run carbonless paper at all the major check printers without marking.
ILF Technologies is a world-leading supplier of web finishing solutions for the printing and converting industries with over 500 installations worldwide.
For further information email email@example.com.