ILF Technologies
About UsProductsServicePartsFAQNews / PressContactIndustrySite MapHome
Products
Industry Products >> Forms & Label Printing Industry

 


Batching Modules

The ILF/Evtec Model EB Modular Batch Delivery System is designed to add batch or ream delivery capability to other cutting or sheeting systems with shingled stream delivery. This add on movable system will produce batch/ream accurately counted stacks of sheets. The EB Modular Delivery System employs an interface conveyor to transport the shingled stream of product to the delivery tapes of the Modular Batching Delivery System. The Model EB is capable of up to 1200 FPM operation depending on substrate, machine set up and adjustment. The Model EB will stack and deliver counted sheets up to 14” (355mm) high at a standard cycle time of 10/15 seconds depending on width.

View Item


Batching Variable Sheeters

The ILF/Evtec Model SBS Servo variable batching platform is designed for variable size cut sheet printing and converting applications where counted and batched stacks of sheets are required. The system is designed for 1200 FPM and 1500 FPM process speeds. Actual speed will depend on paper specifications, cut, and batch size requirements. The system consists of an infeed/slitter section, pull roll, cutting couple, shingle tape delivery section, batching module, and gear side delivery conveyor.

View Item


Chip Board Inserter

The ILF/EVTEC Chip Board Inserter (CBI) is designed to continuously place chipboard either on the bottom, top, or both sides of a sheeted stack produced by an ILF/EVTEC sheeter/ batcher. Unit matches all standard ILF/EVTEC machine widths - 26.5, 33, and 38 inches. The unit is mobile and can be quickly taken on and off the sheeter. Cycle time is 15 seconds.

View Item


Combination Batching and Deep Pile Sheeters

Allows you to change over from a cut size batching sheeter to a skid delivery deep pile (or a skid delivery deep pile to a batching sheeter) machine in under 30 minutes - without moving major pieces in and out. With this feature you have a sheeter system with combination cut ream batching and deep pile skid capabilities in one unit.

View Item


Cutting Modules

The ILF/Evtec modular variable cutter can be easily added to your existing press or converting line for accurate sheeter shear cutting on a variety of substrates up to 250 # knife loading . Sheets deliver to a shingled conveyor for off loading or further processing. Sizes matched to parent machine widths from 26.5” (670mm) to 38” (965mm) and cut lengths from 8” (200 mm) to 28” (710mm).

View Item


Deep Pile Sheeters

The ILF/Evtec Model Commercial 2005 Servo Drive Deep Pile Sheeter offers a solidly built, state of the art economical sheeter for the commercial printing and converting industry. The ILF/Evtec sheeters are designed to provide the ultimate in flexibility and are available in two models for process speeds of 1200 fpm (6 m/s) or 1500 fpm (7.6 m/s). Enjoy a competitive advantage with expanded features such as variable cut sizes and alternate delivery systems to expand your flat sheet platform into new markets.

View Item

Rows: 1 - 6 of 6
Page: 1 of 1

Forms & Label Printing Industry | Web Offset Printing Industry | Converting Industry
ILF Technologies